Basic
•The exposure compensation value is displayed on the LCD monitor when taking pictures with Live View. Refer to P50 for information about Live View.
3 Press the shutter button halfway to set the selected exposure.
•You can also set the selected exposure by doing the following:
–Pressing [FUNC.2]
–Not operating the camera for a few seconds
∫If you are using the command dial only to compensate the exposure
If you set [DIREC. EX. COMP.] to [ON], you can compensate the exposure by rotating the command dial only and do not have to press [FUNC.2]. (It is set to [OFF] at the time of purchase.)
1 Press [MENU/SET] and then press 2.
REC | 1/3 | MENU |
FILM MODE |
| SET |
PICT.SIZE |
|
|
QUALITY |
|
|
RAW REC. | OFF |
|
ASPECT |
|
|
SELECT | EXIT MENU |
|
2 Press 4 to select the [CUSTOM] menu icon [ ] and then press 1.
CUSTOM | 1/4 |
CUSTOM SET | NORMAL |
CUST. SET MEM. |
|
FUNC.1 SET |
|
FUNC.2 SET |
|
DIREC. EX. COMP. | OFF |
SELECT | EXIT MENU |
3Press 3/4 to select [DIREC. EX. COMP.] and then press 1.
CUSTOM | 1/4 |
CUSTOM SET | NORMAL |
CUST. SET MEM. |
|
FUNC.1 SET |
|
FUNC.2 SET |
|
DIREC. EX. COMP. | OFF |
SELECT | EXIT MENU |
4 Press 4 to select [ON] and then press [MENU/SET].
CUSTOM | 1/4 |
|
CUSTOM SET | NORMAL |
|
CUST. SET MEM. |
|
|
FUNC.1 SET |
|
|
FUNC.2 SET | OFF |
|
DIREC. EX. COMP. | ON | MENU |
SELECT | SET MENU | SET |
5 Press [MENU/SET] to close the menu.
•You can also press the shutter button halfway to close the menu.
•After performing steps 1 to 5, rotate the command dial to compensate the exposure.
•EV is an abbreviation of “Exposure Value”. It refers to the amount of light given to the CCD by the aperture value and the shutter speed.
•The set exposure value is memorized even if the camera is turned off.
•The compensation range of the exposure will be limited depending on the brightness of the subject.
•Rotate the command dial slowly but surely.
•You cannot compensate the exposure in manual exposure mode.
•Refer to P73 for information about setting a different function to [FUNC.2].
41
VQT0W82