Others
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[THIS MEMORY CARD IS PROTECTED]
The
[NO VALID PICTURE TO PLAY]
Record a picture or insert a card with a recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
Delete or overwrite the picture after canceling the protect setting. (P94)
[THIS PICTURE CANNOT BE DELETED]/ [SOME PICTURES CANNOT BE DELETED]
Pictures not based on the DCF standard cannot be deleted. If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P97)
[NO ADDITIONAL DELETE SELECTIONS CAN BE MADE]
You have exceeded the number of pictures that can be set at once with
[MULTI DELETE]. Delete the selected pictures and then select [MULTI DELETE] again to delete any remaining pictures. More than 999 favorites have been set.
[CANNOT BE SET ON THIS PICTURE]/ [CANNOT BE SET ON SOME PICTURES]
If the pictures are not based on the DCF standard, the DPOF print cannot be set.
[MEMORY CARD ERROR FORMAT THIS CARD?]
The card format cannot be recognized by the camera. Format the card again with the camera after saving necessary data on a PC etc. (P97)
114
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]
Check that the lens is attached correctly and then turn the camera off and on.
[MEMORY CARD ERROR PLEASE CHECK THE CARD]
An error has occurred accessing the card. Insert the card again.
[READ ERROR
PLEASE CHECK THE CARD]
An error has occurred reading the data. Insert the card again. Make sure the card is inserted properly and then play back again.
[WRITE ERROR
PLEASE CHECK THE CARD]
An error has occurred writing the data. Turn the camera off and remove the card. Insert the card again and turn the camera on. Make sure the camera is turned off before removing or inserting the card to avoid damage.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there are no remaining folder numbers that can be used. (P99)
Format the card after saving necessary data on a PC etc. (P97) If you execute [NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100. (P29)
[PICTURE IS DISPLAYED FOR 4:3 TV]/ [PICTURE IS DISPLAYED FOR 16:9 TV]
•The video cable is connected to the camera. Press [MENU/SET] if you want to delete this message at once.
•Select [TV ASPECT] in the [SETUP] menu to change the TV aspect. (P30)
[CANCEL LIVE VIEW MODE]/[LIVE VIEW MODE CANNOT BE SELECTED]
If you use Live View where the temperature is high or for a long period of time, the temperature of the image sensor will increase and Live View may become unusable. Switch to using the Viewfinder for taking pictures or turn the camera off for a short while.
VQT0W82
