Others
∫TV, PC and printer
1:The picture does not appear on the television.
•Is the camera connected to the TV correctly?
•Set the TV input to external input mode.
2:The display areas on the TV screen and the camera’s LCD monitor are different.
Depending on the TV model, the area display may be smaller so the picture may be stretched horizontally or vertically and the top and bottom or left and right of the picture may be cut off when it is displayed. This is due to the TV specifications and is not a malfunction.
3:The picture cannot be transferred when the camera is connected to a PC.
•Is the camera connected to the PC correctly?
•Is the camera recognized by the PC correctly?
•Set [USB MODE] to [PC]. (P29, 98)
4:The card is not recognized by the PC.
•Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.
5:The picture cannot be printed when the camera is connected to a printer.
•Does the printer support PictBridge?
–You cannot print pictures with printers which do not support PictBridge. (P100)
•Set [USB MODE] to [PictBridge (PTP)]. (P29, 100)
118
6:The ends of the pictures are cut at printing.
•When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)
•Depending on the photo printing store, you may be able to print pictures in 16:9 size if they were recorded when the aspect ratio setting (P79) was [16:9]. Check with the photo printing store before printing.
7:The picture is not displayed fully on the TV.
•Check the [TV ASPECT] setting on the camera. (P30)
∫Others
1:An unreadable language was selected by mistake.
•Press [MENU/SET], select the [SETUP]
menu icon [ 
] and then select the [ 
] icon to set the desired language. (P30)
2:A sound is heard when the camera is turned on or off.
This is the sound of lens or aperture movement and is not a malfunction.
3:A certain part of the picture appears blinking in black and white.
•Is [HIGHLIGHT] set to [ON]?
–This appears due to the highlight feature function which shows white saturated areas. (P29)
4:The AF assist lamp does not turn on.
•Is [AF ASSIST LAMP] in the [REC] mode menu set to [ON]? (P82)
•Are you taking pictures in dark places?
–The AF assist lamp does not turn on in bright places.
VQT0W82
