Basic
Using the Playback Zoom
1 Press [
].
2 Rotate the command dial A downwards to enlarge the picture.
2X
A
4X
CANCEL
DELETE
B
•1a>2a>4a>8a>16a
•When you rotate the command dial upwards after enlarging a picture, the magnification becomes lower. When you rotate the command dial downwards, the magnification becomes higher.
•When you change the magnification, the zoom position indication B appears for about 1 second so that you can check the position of the enlarged section.
3Press 3/4/2/1 to move the position.
2X
4X 
CANCEL
DELETE
•When you move the position to be displayed, the zoom position indication appears for about 1 second.
∫To stop using the playback zoom Rotate the command dial upwards or press [MENU/SET].
∫To delete a picture during the
playback zoom
1Press [
].
2Press 3 to select [YES].
3Press [MENU/SET].
•Even if the indications on the screen are turned off in normal playback mode (P44), the magnification and operation appear on the screen when the playback zoom is activated. You can switch between displaying or not displaying the indications on the screen by pressing [DISPLAY]. When you set the magnification to 1a, the indications on the screen are displayed as in normal playback mode.
•The more a picture is enlarged, the rougher it becomes.
•If you want to save the enlarged picture, use the trimming function. (P95)
•The playback zoom may not operate if pictures have been recorded with other equipment.
47
VQT0W82
