Connecting to other equipment
1 Turn on the camera and the printer.
2 Connect the camera to a printer via the USB connection cable (supplied).
•Align the [1] mark on the USB
connection cable and the [ 
] mark on the terminal of the adaptor when connecting.
•Hold the USB connection cable at C and insert straight in or take straight out.
3 Press 4 to select
[PictBridge (PTP)] and then press [MENU/SET].
USB MODE |
| |
PLEASE SELECT |
| |
THE USB MODE |
| |
| PC |
|
| PictBridge(PTP) | MENU |
|
| |
SELECT | SET MENU | SET |
| ||
•If you set [USB MODE] in the [SETUP] menu to [PictBridge (PTP)] in advance, it is not necessary to set this every time you connect to a Printer. (P29)
•Do not use any other USB connection cables except the supplied one.
∫Single picture
1 Press 3 to select [SINGLE PICTURE] and then press [MENU/SET].
PictBridge
SINGLE PICTURE |
|
| |
DPOF PICTURE |
|
|
|
|
|
| MENU |
SELECT | SET | MENU | SET |
|
| ||
2 Press 2/1 to select the picture and then press 4.
PictBridge 
1/19
PLEASE SELECT
THE PICTURE TO PRINT
SELECT | EXIT MENU |
•The message disappears in about 2 seconds.
3 Press 3 to select [PRINT START] and then press [MENU/SET].
SINGLE PICTURE |
|
|
|
PRINT START |
|
|
|
PRINT WITH DATE |
|
|
|
NUM. OF PRINTS | 1 |
| |
PAPER SIZE |
|
|
|
PAGE LAYOUT |
|
| MENU |
CANCEL SELECT | SET | MENU | SET |
|
| ||
• Press [MENU/SET] to cancel printing.
4 Disconnect the USB connection cable after printing.
101
VQT0W82
