![](/images/new-backgrounds/1218377/218377211x1.webp)
Others
•You can set the aperture value, the shutter speed and the ISO sensitivity on the camera even when attaching the external flash.
•Some commercial external flashes have synchro terminals with
•If you use commercially available external flashes with communication functions other than the dedicated one, they may not operate normally or they may be damaged. Do not use them.
•Even if the external flash is turned off, the camera may enter the external flash mode when the external flash is attached. When you are not using the external flash, detach it or set it to Forced OFF.
•When attaching the external flash, the
•Do not open the
•When attaching the external flash, the camera will become unstable.
•Detach the external flash when carrying the camera.
•When attaching the external flash, do not hold only the external flash because it may detach from the camera.
•If you use the external flash when the
white balance is set to [ ] (Flash) finely adjust the white balance depending on the
picture quality. (P68)
•If you take pictures close to the subject in Wide, the vignetting effect may appear on the bottom of the recorded picture.
•Read the operating instructions of the external flash for details.
106
Using the MC Protector/PL Filter
The MC protector
1 Detach the lens cap.
2 Attach the MC protector A or the PL filter B.
A
B
VQT0W82