EN
Installation
STANDBY
SELECT
For basic installation, see the quick start guide that came with your Wireless TV Link.
Install the remote control blaster cord
1Switch off the transmitter (A).
SLV5400WIRELESSTV LINK TRANSMITTER
IR
SELECT
STANDBY
SLV5400WIRELESSTV LINK TRANSMITTER
WIRELESS TV LINK RECEIVER
2Connect the remote control blaster cord (G) to the IR port.
3Position the blaster light in front of the video source.
See the user manual of the video source for the exact location of the IR sensor on the front panel.
4Switch on the transmitter (A).
5Take the remote control of a video source with you.
6Go to TV2.
7Switch on TV2.
8Switch on the receiver (B).
9Select the correct SCART input on TV2.
10Operate the video source with its remote control.
11If necessary, repeat the steps 3 to 10 for the other video sources.
6
