EN
Troubleshooting
Problem | Tip | ||
No image or wrong • | Make sure video sources are |
| |
image on TV1 | • | connected to the transmitter (A). | |
| Make sure the transmitter (A) is | ||
| • | connected to TV1. | |
| Make sure SCART cables are | ||
| • | firmly inserted. | |
| Make sure the video source is | ||
| • | switched on. | |
| Make sure the correct SCART | ||
| • | input on TV1 is selected. | |
| Select the correct video source | ||
|
| with TV1 source. See page 8. | |
|
| ||
No image or wrong • | Make sure SCART cables are |
| |
image on TV2 | • | firmly inserted. | |
| Make sure the receiver (B) is | ||
| • | connected to TV2. | |
| Make sure both receiver (B) and | ||
| • | transmitter (A) are switched on. | |
| Make sure the video source is | ||
| • | switched on. | |
| Make sure the correct SCART | ||
| • | input on TV2 is selected. | |
| Select the correct video source | ||
| • | with +/- on the receiver (B). | |
| If the video source gives proper | ||
|
| image on TV1: | |
|
| Make sure the video source gives | |
|
| video signal in CVBS mode. See | |
| • | its user manual | |
| Change the wireless channel that | ||
|
| is used for communication. See | |
| • | page 7. | |
| The receiver (B) is out of range | ||
|
| of the transmitter (A). The num- | |
ber of walls and ceilings in between the receiver (B) and transmitter (A) restrict the dis- tance.
10
