Q-Logic 2310FL manual Label, Cpu

2 – QLA2310F/2310FL Label

Q

Table 2-2. QLA2310F/2310FL Board Specifications (Continued)

Type		Specification
Fibre Channel	Bus type: Multimode fibre optic media
specifications	Bus transfer rate:	200 MBps maximum at half-duplex
		400 MBps maximum at full-duplex
	Interface chip:	ISP2310
CPU	Single-chip design that includes a QLogic RISC processor, Fibre
	Channel protocol manager, PCI/PCI-X DMA controller, and
	integrated serializer/deserializer (SERDES) and electrical
	transceivers that can auto-negotiate a data rate of 1 Gbps or
	2 Gbps
RAM	256 KB of sync SRAM supporting parity protection
BIOS ROM	128 KB of flash ROM in two 64-KB, software selectable banks.
	The flash is field programmable.
NVRAM	256 bytes, field programmable
Onboard DMA	Five-channel DMA controller: two data, one command, one
	auto-DMA request, and one auto-DMA response
Frame buffer FIFO	Integrated 4-KB transmit and 6-KB receive frame buffer FIFO for
	each data channel
Connectors	LC-style connector that supports non-OFC, multimode fibre optic
	cabling using a small form factor optical transceiver module
Form factor	17.78 cm⋅10.67 cm (7.0"⋅4.2") (QLA2310F)
	16.93 cm⋅5.15 cm (6.7"⋅2.5") (QLA2310FL)
Operating power	Less than 15 watts

2.4

Label

The transceiver on the QLA2310F/2310FL HBA is a Class I laser product. It complies with IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated under recommended operating conditions.

CLASS I LASER PRODUCT

2-6 FC2354603-00 A