![](/images/new-backgrounds/1306098/306098225x1.webp)
WEB OPERATION | QC40198 User Manual |
|
|
|
|
PTZ
PTZ interface is shown in Figure
Please note, before operation make sure you have set speed dome address, and combo DVR and speed dome connections are OK.
Figure
Please refer to the following chart for detailed information.
Parameter | Function | |
Channel | You can select monitor channel from the dropdown list. . | |
| ||
|
| |
Protocol | Select the corresponding dome protocol.(such as PELCOD) | |
| ||
|
| |
Address | Set corresponding dome address. Default value is 1. Your setup here | |
must comply with your dome address; otherwise you can not control | ||
| ||
| the speed dome. | |
Baud | Select the dome baud rate. Default setup is 9600. | |
Rate |
| |
|
| |
Data Bit | Default setup is 8. Set according to the speed dome dial switch setup. | |
|
| |
Stop bit | Default setup is 1. Set according to the speed dome dial switch setup. | |
| ||
|
| |
Parity | Default setup is none. Set according to the speed dome dial switch | |
| setup. | |
|
| |
Save | You can click save button after you complete setup for one channel, | |
| or you can complete the whole setup and then click save button. | |
|
| |
Refresh | Click this button to get device’s latest configuration information. | |
|
|