NAVIGATION AND CONTROLS

QC40198 User Manual

 

 

 

 

Event type: from the dropdown list you can select motion detection type.

Channel: select the channel to activate recording function once alarm occurs. Please make sure you have set MD record in encode interface (Main Menu->Setting->Schedule) and schedule record in manual record interface (Main Menu->Advanced->Manual Record)

Latch: when motion detection event ends, system auto delays detecting again for a specified time. The value ranges from 10-300 seconds.

Region: Click select button in the “Region” portion of the Detect menu illustrated in Figure 4-20. Here you can set the motion detection zone. As illustrated in Figure 4-21 below, there are 396 (22*18 PAL) /330 (22*15 NTSC) small zones. The green square is current cursor position. The Red zone is the motion detection zone. Black zone is the disarmed zone. You can click the Fn button on the remote to switch between the arm mode and disarm mode. In arm mode, you can click the direction buttons to move the green rectangle to set the motion detection zone. After you completed the setup, please click ENTER button to exit current setup. Click save button to save current setup. If you click ESC button to exit the region setup interface the system will not save your zone setup.

NOTICE: as shown in Figure 4-21, you can left click the mouse and then drag it to set a region for motion detection. Click Fn to switch between arm/withdraw motion detection. After setting, click enter button to exit.

Figure 4-21

Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.

Show message: System can pop up a message to alert you in the local host screen if you enable this function.

Alarm upload: System can upload the alarm signal to the network (including alarm center) if you enable this function.

Send email: System can send out an email to alert you when alarm occurs.

PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to preset, tour & pattern when there is an alarm. Click “select” button, you can see the interface shown in Figure 4-22. Please note: motion detection can only activate the preset.

33 P a g e

Page 41 Page 43
Page 42
Image 42
Q-See QC40198 user manual Navigation and Controls
Page 41 Page 43

QC40198 specifications

The Q-See QC40198 is a high-performance surveillance camera designed to provide comprehensive security solutions for residential and commercial properties. This camera is a part of Q-See's extensive range of security products known for their durability, advanced technology, and user-friendly interface.

One of the main features of the QC40198 is its high resolution. Equipped with a 4MP sensor, this camera delivers crisp and clear images, allowing you to capture fine details even from a distance. This enhanced resolution ensures that you can identify faces, license plates, and other important details, contributing to an effective security system.

The QC40198 also boasts advanced night vision capabilities, utilizing infrared technology to provide clear images in low-light conditions. With a range of up to 100 feet, you can rely on this camera to monitor your property during the night, offering peace of mind even after dark. The automatic switching feature ensures that the camera seamlessly transitions between day and night modes, maintaining optimal visibility at all times.

In terms of durability, the QC40198 is built to withstand various weather conditions, making it suitable for outdoor installations. It features an IP66 weatherproof rating, which means it is resistant to dust and can endure heavy rain, ensuring continued functionality year-round. This robustness makes it a reliable choice for safeguarding your home or business.

The camera also incorporates advanced motion detection technology. This feature helps reduce false alarms by allowing you to set specific parameters for motion detection, ensuring that you are only alerted when necessary. Coupled with real-time alerts sent directly to your smartphone or tablet, you can monitor your property remotely and respond to potential threats promptly.

Another significant characteristic of the Q-See QC40198 is its compatibility with various smart home ecosystems. It can be easily integrated with other smart devices, providing you with the flexibility to expand and customize your security network as needed.

In conclusion, the Q-See QC40198 is a reliable and feature-rich surveillance camera ideal for those seeking an effective security solution. With its high resolution, night vision capabilities, durability, advanced motion detection, and seamless integration with smart home systems, this camera stands out as a top choice in the ever-evolving landscape of security technology. Whether for home or business use, the Q-See QC40198 delivers comprehensive surveillance to enhance safety and security.
Top Page Image Contents