![](/images/new-backgrounds/1306098/306098223x1.webp)
WEB OPERATION | QC40198 User Manual |
| |||
|
|
|
|
|
|
| Parameter | Function |
|
|
|
| Normal | There is |
|
|
|
| out | Corresponding to motion detection alarm output port (multiple |
| ||
|
| choices) |
|
|
|
|
| Enable alarm activation function. You need to select alarm output port |
| ||
|
| so that system can activate corresponding alarm device when alarm |
| ||
|
| occurs. |
|
|
|
|
|
|
| ||
| Alarm | System can delay the alarm output for specified time after alarm ends. | |||
| The value ranges from 10s to 300s. |
|
|
| |
| latch |
|
|
| |
|
|
|
|
| |
|
|
|
| ||
| Alarm | System can upload the alarm signal to the centre (Including alarm | |||
| upload | centre. |
|
|
|
| Record | System auto activates motion detection channel (multiple choices) to |
| ||
| channel | record once alarm occurs (working with motion detection function). |
| ||
|
| Please note current device shall be in alarm record period (Chapter |
| ||
|
| 7.3.2.3 Schedule) and you have enabled the schedule record function |
| ||
|
| in chapter 7.3.3.3 Record. |
|
|
|
|
|
|
| ||
| Record | System can delay the record for specified time after alarm ends. The |
| ||
| latch | value ranges from 10s to 300s. |
|
|
|
|
|
|
| ||
| If you enabled this function, System can send out an email to alert you |
| |||
|
| when alarm occurs and ends. |
|
|
|
|
|
|
|
|
|
| Tour | Display the selected video in local monitor window. |
|
|
|
|
| Tour interval and tour mode are set in combo DVR local menu |
| ||
|
| (chapter 5.3.9 Display ) |
|
|
|
|
|
|
| ||
| PTZ | Here you can set PTZ movement when alarm occurs. Such as go to |
| ||
| Activation | preset x when there is an alarm. |
|
|
|
|
|
|
| ||
| Capture | You need to input capture channel number so that system can backup |
| ||
|
| motion detection snapshot file. |
|
|
|
|
|
|
| ||
| Copy | This is a shortcut menu button. You can copy current channel setup to |
| ||
|
| one or more (all) channels. |
|
|
|
|
|
|
| ||
| Save | You can click save button after you complete setup for one channel, or |
| ||
|
| you can complete the whole setup and then click save button. |
| ||
|
|
|
| ||
| Refresh | Click this button to get device’s latest configuration information. |
| ||
|
|
|
|
|
|