Q-See QC40198 user manual General

MAIN MENU QC40198 User Manual

5.3.1 General

General setting includes the following items. See Figure 5-3.

Figure 5-3

System time: Here is where you set system time

Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.

Date separator: There are three options to separate date: dot, beeline and solidus.

DST: Here you can set DST time and date. Enable DST function and then click set button. You will see an interface shown in Figure 5-4.

Figure 5-4

Here you can set start time and end time by setting corresponding week setup. In Figure 5-4,enable date button, you can see the interface shown in Figure 5-5.Here you can set start time and end time by setting corresponding date setup.

Figure 5-5

Time format: There are two types: 24-hour mode or 12-hour mode.

48 P a g e