Q-See QSDF8204 user manual Sensor Alarm

STEP3

menu.

QSDF8204 Digital Video Recorder User Manual

Fig 3.11 Detection Area Setup

Sub-steps for manually selecting the detection area are described below:

1.In the Area Setup submenu, choose "CUSTOM" option.

2.Press "Enter" key to confirm the operation.

3.Press "Up", "Down", "L eft" and "R ight" buttons to choose the area which needs to be detected

4.Press "Enter" key to select or cancel the area.

5.Press "Esc" button to confirm the option and exit "CUSTOM" option.

Press "BACK" option to go back the Motion Alarm Configuration

Notice: If continuous recording mode, manual record and alarm record are activated at the same time. The alarm events can be found in Search by Event”, please refer to the ‘3.3.2 Search’ function in ‘3 Search by Event’.

9. COPY TO

Use this option to copy the settings of this channel to any other selected channel.

SENSOR ALARM

Sensor alarm submenu is shown as Fig. 3.12. Every Sensor matches one or more channels.

Fig 3.12 Sensor Alarm Configuration

19