Q-See QSDF8204 user manual Prerecord Time, Time Stamp, Video Quality, Schedule Record

STEP1

STEP2

up.

STEP3

QSDF8204 Digital Video Recorder User Manual

3. PRERECORD TIME

Prerecord time refers to the amount of time recorded from memory before the alarm was triggered. There are two options: 5 seconds and 10 seconds.

4. TIME STAMP

If selected, record time will be displayed on the bottom of the screen at playback

5. CHANNEL

STEP1 Move the cursor to the item.

STEP2 Press "Enter" key to switch the channel and select.

6. VIDEO QUALITY

There are five options: lowest, lower, medium, higher and highest. The higher the picture quality, the clearer the image is, but more hard drive space will be taken up.

7. AUDIO

If you check "AUDIO", DVR will record audio with video recording. Otherwise, it will not record audio.

Notice: • The default setting is that Audio input1 matches channel1 and Audio input2 matches channel2.

•When playing back the record, please press "AUDIO" button to switch the sound to the corresponding channel.

8.SCHEDULE RECORD

Schedule Record Setup is shown as Fig. 3.8.

Fig 3.8 Schedule Setup

Move the cursor to "SCHEDULE RECORD" option

Check "SCHEDULE RECORD", and the “Setup” window will pop

Press "Setup" to enter the Schedule Setup menu.

Press "ESC" button on the front panel to get back to upper menu. STEP4 In the Schedule Setup menu, move the cursor to select a day, and check “whole day” if you want to record all of the time.

STEP5 If you only want to record certain time periods press "Enter" key to set up time.

STEP6 Press "+" and "-" buttons on the front panel to modify the time.

Notice: When you use the mouse, you need roll the middle wheel to modify the time.

16