Q-See QSDF8204 user manual System Information, Update Firmware, Load Default

QSDF8204 Digital Video Recorder User Manual

SYSTEM INFORMATION

System information submenu is shown as Fig. 3.30. It displays the information about the system, such as firmware version, device name, DVR IP ADDRESS, Client information and so on.

Fig 3.30 System Information

Press the "INFO" button on the front panel and it will display the system information on the screen.

UPDATE FIRMWARE

Fig 3.31 Update Firmware

Update Firmware submenu is shown as Fig. 3.31. Users can use USB flash drive to update the firmware.

Steps are described below:

STEP1 Make sure the firmware update is on the USB flash drive. STEP2 Enter the menu after word-‘USB’ is displayed on the live mode. STEP3 Move the cursor to "UPDATE" button.

STEP4 Press "Enter" key to start updating.

STEP5 After the program is upgraded, the system will restart.

LOAD DEFAULT

Fig 3.33 Load Default

Load Default menu is shown as Fig. 3.33. Click YES, and it will recover the default setting installed at the factory.

28