Q-See QSDF8204 4.3Remote Playback and Search, Record Click DVR Record button, DVR Status Panel

QSDF8204 Digital Video Recorder User Manual

4.2.4 Record

STEP1 Click "DVR Record" button.

STEP2 Select "Start Record" in drop down list to record. STEP3 Select "Stop Record" in drop down list to stop recording.

4.2.5 Camera Audio (for cameras that have microphones)

There are two options: close camera audio and open camera audio. The setting steps are:

STEP1 When you are in live display mode or playback mode, select a channel to display in Large Picture mode.

STEP2 Right-click the image and then select "Open Audio" to play the camera’s audio.

STEP3 Click button to turn the audio up or down.

4.2.6 DVR Status Panel

Meanings of the colored indicator lights in the main interface are shown below:

1. Grey light: Normal State

2. Green light: Manual Record State

3. Yellow light: Motion Detection Record State

4. Red light: Sensor Alarm Record State

5. Blue light: Video Loss State

4.3Remote Playback and Search

4.3.1Remote Playback

Click button on Main Interface to enter playback mode, which is shown as Fig 4.5 Remote Playback.

Search By Date

Search By Channel

Backup

Lock

Record Playback and Control Snap Picture Event Search

Fig 4.5 Remote Playback

38