Q-See QSDF8204 Basic Operation Guide, How to Start DVR, Basic operation of TFT LCD Monitor Screen

QSDF8204 Digital Video Recorder User Manual

CHAPTER 3 Basic Operation Guide

3.1 How to Start DVR

Notice: Before powering on the unit, please make sure the power input matches the local power voltage.

To start the DVR:

STEP1 Connect the DVR to AC adaptor and plug in. STEP2 Turn on the DVR.

STEP3 Wait for the DVR to initialize.

After DVR is powered on, ‘STARTING……’ appears on the screen, which

indicates the DVR is initializing.

After ‘WELCOME’ is displayed, you enter into live display mode. You can press the "Menu" button to enter Main Menu.

The symbols displayed on the screen are explained in the following table:

Symbol	Meaning	Symbol	Meaning
LIVE	Live picture mode	REC	Manual recording
A	Sensor recording	M	Motion recording
DISK	Percentage of hard	V-LOSS	Video loss
	drive used

3.1.1 Basic operation of TFT LCD Monitor Screen

The basic operation of TFT LCD monitor screen is shown below:

Press OPEN button, the TFT LCD Monitor Screen will pop-up, press OPEN again it will close.

OPEN

TFT LCD Monitor Screen Open.