QSC Audio PL218, PL224, PL236 Port de données, Netzanschluß DataPort, DataPort puerto de datos

Examples of Accessories for PL2 Amplifiers

2-way system

3-way system

Subwoofer

C O N N E C T I O N S

Operating voltage (AC mains)

The correct AC line voltage is shown on the serial number label (page 8, item #11). Connecting to the wrong line voltage is dangerous and may damage the amplifier. The power cord attaches to the IEC connector on the rear panel (page 8, item #12). Use the cord supplied with the amplifier, or an equivalent. Insure that the wire gauge of the cord is #14 AWG. Use of smaller wire gauges can reduce the line voltage available to the amplifier. A power cord retaining clip (page 8, item #12a) is provided with the amplifier. We recommend you install and use the retaining clip to prevent accidental power cord disconnection.

DATAPORT

The amplifier features a DataPort (page 8, item #1) which connects to accessory products to enhance your amplifier application. The CM16a Amplifier Network Monitor can remotely control and monitor your PL2 amplifier. Other QSC accessories connect via the HD-15 DataPort connector.

ACCESSORIES

Accessories for the PL2 amplifiers include crossover, filter and DSP modules that mount directly to the rear panel of the amplifier.

These accessories include the XC-3, a 2-way crossover; the SF-3 Subwoofer Filter; and the LF-3 Low- Frequency filter. You can use these accessories to create 2-way, 3-way, and 4-way (3-way plus subwoofer) active systems.

For accessory information, contact QSC's Technical Services Department or your QSC representative.

C O N N E X I O N S

Tension d'utilisation (alimentation CA)

Port de données

ACCESSOIRES

A N S C H L Ü S S E

Netzanschluß

DataPort

ZUBEHÖR

C O N E X I O N E S

Voltaje de operación (alimentación CA)

DataPort (puerto de datos)

ACCESORIOS

22