6)With the valve control box under the edge of the bowl, connect the pilot tube to the top of the valve in the control box.
The stainless steel flex connector is to be connected to the brass elbow located on the top of the valve control box.
The piezo ignitor lead is to be connected to the ignitor lead coming out of the valve control box.
Thermopile
8) Replace leg “A” under the Fogata Grande bowl and se- cure the valve control box on the two screws previously in- stalled in step 3
Figure 5
7)Feed the thermopile up through the oval hole in the bowl and insert it into the open hole in the pilot assembly. Ensure that the thermopile snaps into place and is securly in posi- tion to ensure proper connection.
9) With all the gas componets now securly in place, take the lava rock supplied and spread it over the screen so that it covers the sides of the burner but ensure it does not cover the top of the burner in order to ensure proper flame
10) Log Instalation and placement instructions for the log set are provided with the log set
October 2006 |
