Clover Electronics LCD22168, LCD221616, LCD22164 instruction manual Installation

5. Installation

5-4. Installation

5-4.1. Camera Connection

▫Connection of 6pin MINI DIN Cameras

Connect the supplied cameras to the Camera Input (6pin mini DIN jack) on the back of the system as shown in [Fig. 5-2 Rear View].

▫Connection of BNC Cameras

Connect the BNC cameras (not included) to the Camera Input (BNC connector) on the back of the system as shown in [Fig. 5-2 Rear View].

5-4.2. Installation of the Monitor

[Fig. 5-4-1 Releasing the Lever] [Fig. 5-4-2 Locking the Lever]

▫Desktop

-Pull the Lever to the left as shown in [Fig.5-4-1]and move the panel forward or backward until getting the proper angle of panel (screen) for viewing.

-Release the Lever and push it to the right as shown in [Fig.5-4-2]for locking the mounting bracket.

▫Installation of the system on the wall

-Remove the screw cover on the top of the mounting bracket.

-Place the system on the flat surface with soft fabric and set the proper angle of panel

25