Clover Electronics LCD221616, LCD22168, LCD22164 Back UP LED, Play LED, Rec Led, Timer LED

5. Installation

1.Stand-by Power Mode Button

-Turn the LCD Panel (Screen) On or Off

-Even though the LCD Screen is turned off by pressing this button, the system will be continued to work.

2.REC Key

-Press this key to start to record.

-In order to stop recording, click the REC button on the MENU Bar and the following message will be appeared. Click the OK button.

3.MENU / ENTER Key

-This key along with (+), (-), and Exit key are used for Video enhancement on VGA output (See section 7-8.2 for more detailed information).

4.EXIT Key

See section 7-8.2 for information.

5. TALK Key

See section 6-7.4.2 for information.

6.VOLUME / DATA (+) Key

-Used to increase Audio Volume for the system.

-See section 7-8.2 for additional information.

7.VOLUME / DATA (-) Key

-Used to decrease Audio Volume for the system.

-See section 7-8.2 for additional information.

8.BACK UP LED

-The red LED will blink when the system is in the copying mode.

9.PLAY LED

-The green LED will blink when the system is in the playing mode.

10.REC LED

-The red LED will blink when the system is in the recording mode.

11.TIMER LED

-The red LED will blink when the system is in the timer recording mode.

21