Clover Electronics LCD221616, LCD22168, LCD22164 instruction manual 138

Stand-alone DVR Instruction Manual

③Network Image

▫Size

Choose a Size (Resolution) among D1, Half D1 and CIF you wish to display on the DVR Master by clicking the mouse. This setting does not affect the DVR.

▫Quality

Choose one among LOW, NORMAL, HIGH and BEST you wish to display on the DVR Master by clicking the mouse. This setting does not affect the DVR.

▫Bandwidth

The default is set to unlimited. Select between 64KBPS to 10MBPS to optimize your network performance.

④Video Enhance

-Adjust the Brightness of screen by clicking on the bar or dragging the slider on the bar.

-Adjust the Contrast of screen by clicking on the bar or dragging the slider on the bar.

-Adjust the Saturation of screen by clicking on the bar or dragging the slider on the bar. ○5 Auto Save

It enables users to save live images from the DVR system to a PC through internet.

-Select one among OFF, 1GB, 2GB, 5GB, 10GB and 50GB on the Config Dialog menu as shown in Fig.8-6 before clicking the “CONNECT” button on the DvrMaster. The “GB”, Giga Bytes represent the data volume of live images you can save to a PC.

-The live images will be saved in the AutoSave Folder (Open Windows Explorer – click My Computer – click Program Files – click DvrMaster – click AutoSave).

-To replay, refer to Section 8-5 PLAYER.

○6 Firmware Update

-Save the latest Firmware to the System Files (Open Windows Explorer – click My Computer - click the Program Files – click DVR Master – click System Files).

-Click the Firmware Update button in the Fig.8-6 and then you will be asked “Do you want to update a firmware?”

-Click the Yes to update.

-Double click the latest firmware as shown in Fig.8-7 and then you will be asked “Shall I update firmware?”

-Click the OK to update. The DVR will display the “Firmware Updating…..” along with the progressive bar on the screen and it will automatically reboot.

138