Clover Electronics LCD221616, LCD22168, LCD22164 instruction manual Network, IP Mode

Stand-alone DVR Instruction Manual

7-7. NETWORK

▫Click the “NETWORK” button in the SETUP menu and then the NETWORK menu will be displayed on the screen as shown in Fig.7-92.

▫Click the (EXIT) button to return to the SETUP menu.

[Fig.7-92 NETWORK menu]

7-7.1. IP Mode

When the system uses the same IP address every time it connects to the network, it is known as a static IP address. If the system’s IP address changes frequently, it is called a dynamic IP address. Check with your Internet Service Provider to determine which IP address was given. This manual will guide users through the setup process for both types.

DYNAMIC IP: automatically receives IP address from the router or gateway. It doesn’t need to enter the GATEWAY ADDRESS, SUBNET MASK and IP ADDRESS.

STATIC IP: requires you to enter the GATEWAY ADDRESS, SUBNET MASK and IP ADDRESS.

▫Click the “IP MODE” button in the NETWORK menu and then the IP mode pop-up window will be displayed on the screen (See Fig.7-94).

▫Select the STATIC or DYNAMIC by clicking the mouse depends on your networking.

114