Clover Electronics LCD221616, LCD22168, LCD22164 By using the Copy Start/End set-up buttons

Stand-alone DVR Instruction Manual

①All channels, HOUR selection button

② HOUR selection button

③channel selection button

[Fig.6-40 Copy Start time and Channel Selection window]

①All channels, HOUR selection button.

Click the arrow button on the upper left corner as shown in Fig.6-40 to set the full extent of the recording and all the channels simultaneously.

②HOUR selection button

Select the start time to copy by clicking the mouse on HOUR (0-23: in the military hour). Thereafter the extent of the copy will be saved on.

③Channel selection button

Some channels can be selected by clicking the mouse on the corresponding channels.

By using the Copy Start/End set-up buttons:

The time and date can also be set on the Copy Start/End set-up buttons window (See Fig.6-41).

▫Select the values (year/month/date and hour/minute/second) by clicking the mouse, change the values with the mouse’s wheel and click the mouse again on the changed values to complete as shown in Fig.6-41.

66