Clover Electronics LCD22164, LCD221616, LCD22168 Ddns Dynamic Domain Name System, Host Name

7. Setup

7-7.6. DDNS (DYNAMIC DOMAIN NAME SYSTEM)

▫Select the DDNS button in the NETWORK menu by clicking the mouse or pressing the buttons on the remote controller. The DDNS menu will show up as shown in Fig.7-103.

▫To return to the NETWORK menu, Click the (EXIT) button.

▫If you were in the middle of entering values on the DDNS menu, you can’t exit by clicking the mouse. Choose the SERVER button in the DDNS menu by clicking the mouse and

select the DISABLE, and then click the (EXIT) button.

[Fig.7-103 DDNS menu]

▫SERVER

-Choose the SERVER button in the DDNS menu by clicking the mouse or pressing the buttons on the remote controller and select the DYNDNS.ORG (or NO-IP.ORG) provided by www.dyndns.org (or www.no-ip.org) at no cost.

[Fig.7-104 SERVER button]

▫HOST NAME

-Click the HOST NAME in the DDNS menu and type the HOST NAME registered to the DDNS server such as DYNDNS.ORG and NO-IP.ORG by using the On Screen Keyboard.

-After changing the values, click on the OK button.

119