7. Setup

7-6.9. Recording by Motion Detection

When the menu of motion is properly set up (See section 7-6.3 for all the channels and this section for each of the channels) and detected motion of objects, the system begins recording automatically. The recording icon on the MENU bar should be selected in this recording mode. If not, it won’t be recording.

Click the mouse on the button for each of the channels in the RECORD menu, then the MOTION menu will be displayed on the screen as shown in Fig.7-68.

Click the (EXIT) button to return to the RECORD menu.

[Fig.7-68 MOTION menu]

ON/OFF

The system will start recording when MOTION is detected and the ON is selected in the MOTION menu by clicking the mouse. If the OFF is selected, the system won’t be recording.

[Fig.7-69 MOTION ON/OFF button]

103

Page 103
Image 103
Clover Electronics LCD22168, LCD221616, LCD22164 instruction manual 103