Operation
PISTON OVERDRIVE
If the tool does not open after firing and the piston is 1/2 inch or more out of the muzzle:
1.Strike muzzle end of tool against hard surface to force piston back into muzzle.
2.Advance power load strip and reset piston (See step 6 of Operation).
OVERDRIVE
Maintenance
IMPORTANT:
Clean tool after each days use. Disassemble and clean the barrel assembly with the wire brush provided with tool. Notice: DO NOT attempt to clean power load strip channel with wire brush. Apply good quality penetrating lubricant spray (such as
Parts List
Key | Part |
|
|
|
No. | No. | Description | 493 | 498 |
|
|
|
|
|
1 | 301002 | Body | 1 |
|
| 306001 | Body |
| 1 |
2 | 301034 | Trigger Pin | 1 | 1 |
3 | 301906 | Advance Assembly (Holder, Bar, Tube) | 1 | 1 |
4 | 301531 | Advance Spring | 1 | 1 |
5 | 301533 | Trigger | 1 | 1 |
6 | 301015 | Screw | 2 |
|
| 306015 | Screw |
| 2 |
7 | 305100 | Liner | 1 |
|
| 306100 | Liner |
| 1 |
8 | 301014 | Annular Spring | 1 |
|
| 306014 | Annular Spring |
| 1 |
9 | 301013 | Ball Bearing | 1 | 1 |
10 | 501107 | Stop | 1 |
|
| 306012 | Stop |
| 1 |
11 | 301016 | Push Pin | 1 | 1 |
12 | 301046 | Ball Bearing | 2 | 2 |
13 | 301047 | Spring | 2 | 2 |
14 | 305006 | Piston Sleeve | 1 |
|
| 306006 | Piston Sleeve |
| 1 |
15 | 305913 | Piston Assembly (Includes Piston and Ring) | 1 |
|
| 306903 | Piston Assembly (Includes Piston and Ring) |
| 1 |
16 | 301208 | Piston Ring | 1 | 1 |
17 | 305010 | Guide | 1 |
|
| 306010 | Guide |
| 1 |
16 | 114915 |
