Application Chart
IMPORTANT
•Recommended for use with Remington® power load strips and power fasteners.
•Model 498 users: DO NOT use power fasteners longer than 1 1/2".
•If power fastener goes below the top surface of the board, use penetrating control disc (see illustration below) or washered
•Operators and bystanders must ALWAYS wear goggles and ear protection which meet or exceed the accepted standards for adequate protection in your country. In the USA, refer to ANSI standards. In Canada, refer to CSA standards.
*Use power fastener with penetration control disc,
part number 015549.
|
| Load |
| Color Code | |
.27 CALIBER strip loads for | Stock | Level | Load | Case |
|
powder actuated tools | Number | Number | Strength | Body | Head |
|
|
|
|
|
|
| 78757 | 3 | medium | brass | Green |
| 78758 | 4 | heavy | brass | Yellow |
| 78759 | 5 | extra heavy | brass | Red |
|
|
|
|
|
|
114915 | 25 |
