Quantum 610 owner manual Multi-Axis Foot Plates

	V . C O M F O R T A D J U S T M E N T S
To adjust the forward/back position:
1.	Remove the adjustment bolts from the side rails.
2.	Move the leg rest hanger in or out to the desired
	position.
3.	Align the adjustment holes in the leg rest hanger with
	those in the side rail.
4.	Reinstall the adjustment bolts to secure the leg rest
	hangers.	A
		B
To adjust the leg rest length:
1.	Remove the adjustment screws from the leg rest exten-
	sion.	C
2.	Slide the leg rest up or down to the desired length.
		D
3.	Align the adjustment holes in the leg rest extension and
	reinstall the adjustment screws.
Multi-Axis Foot Plates
The multi-axis foot plate assembly can be installed on either
a swing-away footrest or an elevating leg rest. The multi-		A
axis foot plate has four adjustments: leg rest length (A),
position (B), tilt (C), and angle (D). See figure 27.
To change leg rest length (A):
1.	Remove the hardware.
2.	Move the leg rest to the desired position.	B
3.	Reinstall the hardware.
To change foot plate position (B):
1.	Remove the hardware.
2.	Move the foot plate to the desired position.
3.	Reinstall the hardware.
		C
To change foot plate tilt (C):
1.	Loosen the hardware.
2.	Tilt the foot plate to the desired position.
3.	Tighten the hardware.
To change foot plate angle (D):		D
1.	Turn the setscrew clockwise to decrease the angle.
2.	Turn the setscrew counterclockwise to increase the
	angle.
		SETSCREW LOCATION
		Figure 27. Multi-Axis Foot Plate (ELR Shown)

Quantum 610 www.quantumrehab.com 29