I V . A S S E M B L Y

Power Seat Option Installation

Your power chair may be equipped with the power seat option. While the seat itself may be any one of the styles offered for this model, the way the seat base attaches to the power base is differ- ent.

To install the power seat:

l.Align the post on the bottom of the power seat base over the hole in the power seat actuator.

2.Slide the post into the actuator and push the friction lock lever forward.

3.Connect the power seat cable to the power base.

4.Tilt the seat back and slide the rear extension onto the power seat base.

5.Lower the front extrusion onto the power seat base until the seat locks into place.

6.Flip down the seat latch safety.

7.Install the controller.

NOTE: Refer to V. “Comfort Adjustments” for more in- formation on controller installation and adjustment.

WIRE TIES

Figure 13. Remote Plus Controller Routed on a Contour Seat

FRICTION LOCK

LEVER

POWER SEAT

ACTUATOR

Figure 14. Power Seat Actuator

Quantum 610

www.quantumrehab.com

23

Page 23
Image 23
Quantum 610 owner manual Power Seat Option Installation, To install the power seat