Quantum Data 700 Series manual Selecting Formats, Viewing Formats by Signal Type

Selecting Formats

Viewing Formats by Signal Type

Press the Signal Type button, and then select a signal type, to list formats based on the selected signal type.

VESA Red, green, blue component color video per VESA standards. (DVI-to-VGA adaptor used for outputs.)

*VESADVI

_NTSC/PAL

_HDTV/SDTV RGB

_HDTV RGB USER

NTSC/PAL Composite color baseband video

signal (BNC connector) and Separate Luminance and Chrominance video signals (S-Video connector) or RGB component video per NTSC and PAL standards.

Names of formats using modulated RF output end with _Cnn, where nn is the NTSC-M or PAL-G television channel used.

HDTV/SDTV-RGBLuminance plus color difference signals per HDTV standards

HDTV RGB RGB component color video signals per HDTV standards

DVI Digital video signals (701 only)

USER User-defined formats, of any type, stored in non-volatile memory

Selecting Formats

Press the Format button to select from a list of video formats of the type selected from the Signal Type menu.

Reloading Standard Formats

If you modify or delete standard formats, you can restore the original formats by reloading the standard formats.

To reload the standard formats:

1.Select Options > Clr_Fmts to delete all formats, including user-created formats.

2.Select Options > Reload Fmts to restore the standard formats to their original memory locations. The standard formats will replace any user-created formats in the original memory locations. User-created formats in locations not previously occupied by a standard formats will not be replaced.

6