OS/2 | Quatech DSC-200/300 specs

7 OS/2

The OS/2 device driver supports up to 32 serial ports in a system. Installation is a manual, but simple, process. Please refer to the read me documentation included on the Quatech COM CD with the device driver for full installation and configuration details.

Quatech DSC-200/300 User's Manual

28

Image 28

Quatech DSC-200/300 user manual OS/2

Contents

DSC-200/300 Warranty Information Page Declaration of Conformity Manufacturers Name RS-422 or RS-485 Signal Line Termination Using the New Hardware Found WizardAddress Map and Special Registers Base Address and Interrupt Level IRQPage General Information Features IND Option --- Surge Suppression Upgrade Hardware Configuration Factory default signal termination settings Signal Connections Full-duplex/Half-duplex Operation Enable Scratchpad Register SPAD, J13 Clock Rate and Optional Registers Force High-Speed Uart Clock X2, X4, or X8, J10-J12 Clock multiplier jumper options Hardware Installation Jumper/connector locations Channel Address Range Enabling the Special Registers Interrupt Status Register Options Register Bit Name Description Clock Rate Multiplier RR1 RR0 Windows Configuration Windows Millennium Windows Windows Windows Page Using the New Hardware Found Wizard Windows NT DOS and Other Operating Systems QTPCI.EXE QTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections Jumper/Channel correspondence RTS/CTS Handshake Rclk Xclk AUXIN/AUXOUT Loopback Half-Duplex/Full-Duplex Selection Half- or full-duplex selection Termination Resistors RS-422/485 Line termination resistance values DSC-200/300 connector definitions RS-422/485 Peripheral Connection PCI Resource Map INTA# 10Specifications Troubleshooting Computer will not boot up DSC-200/300 Revision March