15-1925.fm Page 18 Monday, July 19, 1999 12:59 PM
Follow these steps to control Plug ’n Power mod- ules.
1.Position the IR command console within the RF command console’s line of sight.
Note: For the best operation, position the controllers at least 2 feet apart.
2.Plug the IR command console’s power cord into any standard AC outlet.
3.Set the house code dial on top of the IR com- mand console to the same letter as your Plug ’n Power modules.
4.Set the selector switch on the IR command console for the group of modules you want to control
5.Press Plug ’n Power on the 6 in 1 IR/RF Remote Control.
6.To turn on all light and appliance modules set to the same code as the IR command con- sole, press All Lts On (PWR) on the 6 in 1 IR/ RF Remote Control, or ALL LIGHTS ON on the IR command console.
To turn off all light and appliance modules set to the same house code as the IR command console, press All Off (MUTE) on the 6 in 1 IR/RF Remote Control, or ALL UNITS OFF on the IR command console.
7.To turn on or off specific lights and appli- ances using the 6 in 1 IR/RF Remote Con- trol, press the digit key (1, 2, 3, 4, 5, 6, 7, or 8) for the module you want to control. Then press ON or OFF (CH s or CH t).
To control specific lights and appliances directly from the IR command console, press the button on the console that corresponds to the number of the module you want to control (1/5, 2/6, 3/7, 4/8). Then use the function keys on the IR command console to control the device.
Need help? Call
18
