Need help? Call
1-800-950-7044
13
2. Aim the 6 in 1 IR/RF Remote Control at the
device and press SCAN. The 6 in 1 scans
through the channels.
Note: The 6 in 1 must be pointed at the
device the entire time you are using the
Channel Scan feature.
3. To stop scanning, simply press any key
(other than SCAN) on the remote control.
FAVORITE CHANNEL SCAN The Favorite Channel Scan feature lets you set
up your 6 in 1 IR/RF Remote Control to scan
through a list of up to 10 pre-selected channels,
stopping at each for about 3 seconds.
Setting Favorite Channel Scan
Note: Favorite Channel Scan can only be set up
for one device. Once the Favorite Channel Scan
feature has been set up for one device, you must
clear it before you can set it up for another device.
1. Pres s the desired device key (TV, VCR, or
CBL).
2. Hold down SET UP until the red light blinks
twice, then release it.
3. Press 9 – 9 – 6. The red light again blin ks
twice.
4. Enter the 2-digit number of the first channel.
(Enter a 0 before a single-digit channel num-
ber.)
5. Af ter you have entered a channel number,
press and release SET UP. The red light
blinks twice.
For example:
0 – 9 – SET UP (for channel 9)
15-1925.fm Page 13 Monday, July 19, 1999 12:59 PM