Radio Shack 15-1925 owner manual Using the Sleep Timer, Controlling Lights and Appliances

15-1925.fm Page 17 Monday, July 19, 1999 12:59 PM

Follow these steps to turn off punch-through.

1.Press the device key (CBL or VCR) for the device you want to use to control the volume, for example. Then press SET UP until the red light blinks twice.

2.Press 9 – 9 – 3. The red light blinks twice. Press the device key (CBL or VCR) for the device you want to use to control the volume. The red light blinks twice to indicate punch- through is turned off.

To turn on the punch-through feature, press SET UP – 9 – 9 – 3 – TV. The red light blinks twice to indicate that punch-through is on.

USING THE SLEEP TIMER

If your original remote control had a sleep timer function, your 6 in 1 IR/RF Remote Control’s SLEEP key operates the same as on your original remote.

Follow the instructions for the sleep timer function in the owner’s manual from your original remote control. Press SLEEP in the exact same manner as the original remote control’s SLEEP key was pressed.

CONTROLLING LIGHTS AND APPLIANCES

The Plug ’n Power feature allows you to control lights and appliances, using the supplied RF com- mand console along with an optional IR com- mand console (RadioShack Unlimited No. 10037703). You also need Plug ’n Power light modules and appliance modules (available through your local RadioShack store) to use this feature.

Need help? Call 1-800-950-7044

17