Radio Shack 16-3255 owner manual 100%6+061#68#0&#/2.++4

±"016'"±"

•Some TVs do not have an RCA or S-Video jack, they only have a coaxial antenna jack. In this case, you must purchase an RF modulator (not supplied, available at your local RadioShack store).

•When you connect the DVD player to a TV, the DVD player’s display and speakers remain on. To turn off the display, slide OFF/ ON under the screen to OFF.

•You may turn the DVD player’s volume to the minimum level when listening to the TV’s speaker.

Other Connections

3.Connect the supplied Audio/Video cable’s white plug to the AUDIO OUTPUT L jack on the rear of the DVD player

and connect the white plug’s other end to the TV’s Audio Input Left jack. ±

%100'%6+0)"61"#"68"#0&"#/2.+(+'4

You can also connect the DVD player to a TV and to a stereo amplifier to enjoy high quality stereo sound.

1.Connect the audio/video cable’s left (white) and right (red) plugs to your audio/video receiver’s Audio In Left and Right jacks. Connect the other end of the cable to your DVD player’s AUDIO OUTPUT L and R jacks.

2.Connect the audio/video cable’s yellow plug to the VIDEO OUTPUT jack on the back of your DVD player, and the other yellow plug to the Video Input jack on your TV.

12