$#5+%"+056#..#6+10
For a graphical view of the installation, see the Quick Start.
+056#..+0)"6*'"&8&"2.#;'4 +0"#"8'*+%.'
1.Make sure the DVD player is securely fastened in the carrying case.
2.Pull down the panel on the back of the carrying case and reattach it, aligning the velcro strip to the catch panel.
3.Attach one of the supplied straps to the carrying case and hang the strap over the back of the headrest.
4.Attach one strap to each loop on the bottom of each side of the carrying case.
5.Wrap the straps around the bottom front of your seat and attach them together. The configuration varies depending on you car seat.
6.Secure the DVD player by adjusting the straps to the appropriate length for your car seat.
%100'%6+0)"8'*+%.'"$#66'4;"219'4
You can power the DVD player from your vehicle’s 12V power source (such as a
1.Unzip the middle zipper on the carrying case to insert the adapter plug into the jack.
2.Connect the supplied 12V DC adapter cord’s barrel plug to the DC IN 12V jack on the back of the DVD player.
3.Connect the other end of the adapter to the vehicle’s cigarette lighter socket. #
%100'%6+0)"*'#&2*10'5
The DVD player has two
1/8 inch (3.5 mm) plug(s) into the V1 and/or V2 jack(s).
."%#76+10".
•You must use a power source that supplies 12V DC and delivers at least 2.5A. Its center tip must be set to positive and its plug must fit the DVD player's DC IN 12V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the DVD player or the adapter.
•Always connect the adapter to the DVD player before you connect it to the power source. When you finish, disconnect the DC adapter from the power source before you disconnect it from the DVD player.
#"+/2146#06"#
To avoid draining your car’s battery power, do not leave the DVD player on or the DC adapter connected to the cigarette lighter when your vehicle is not running.
Basic Installation
9
