14
Operation
5. Adjust VOLUME to a comfortable listening level.
6. To stop playing a disc, press STOP D.Ô
7. Press EJECT to remove the disc from the player.
8. To turn off the TravelTheater, press POWER º.
PROGRAMMING TV CHANNELS
1. Press POWER º.
2. Press TV/DVD/AUX on the remote or TV/AUX on the
TravelTheater to select TV mode.
3. Press TV/CATV on the remote to select reg ular
broadcastTV or cable TV (Standard Cable, HRC
Cable, and IRC Cable).
4. Press AUTO MEMORY on the remote or PROG. on the
TravelTheater. All available channels are searched
andtuned. Channels with signals detected are
automaticallystored.
5. Repeatedly press SKIP/SEAR CH to turn SKIP on or off.
IfSKIP is on, w hen you use d CHANNEL eor CH+/CH–
toscroll through channels, the TV stops only on
channelsthat were stored into memory. If SKIP is off,
theTV searches and stops at all available channels.
6. Tomanually store a TV channel, tune to that channel
and press ERASE/WRITE until MANUAL MEMORY ADD
appearson the screen.
Toerase a channel from memory, tune to that channel
and press ERASE/WRITE on the remote untilMANUAL
MEMORY ERASE appearson the screen.
WATCHING TV
1. Press d CHANNEL eon the Travel Theater or CH+/CH–
on the remote to tune to the desired channel. You can
alsouse the number buttons to manually enter the
channelnumber.
2. To adjust the volume, press d VOLUMEeon th e Travel
Theateror VOL +/ VOL– on the remote.
Ô NOTE Ô
Whenyou stop playing a disc, the
TravelTheater remembers where
youstopped. When y ou press
PLAYg to start playing the disc
again,the Travel Theater picks up
whereyou left off unless you press
STOPD, eject the disc, or turn off
theTravel Theater.