the display. Repeatedly press MEMO/2 WAY/HOUR until you hear or see the correct hour.
4.While holding down SKIP/TIME SET/CHECK, press PLAY/ PAUSE/MIN. The system announces “01”. 01 appears on the display. Repeatedly press or hold down PLAY/PAUSE/ MIN until you hear or see the correct minute.
Note: When you hold down PLAY/PAUSE/MIN, the system will move forward by 10 minutes until it reaches 00.
5.Release SKIP/TIME SET/CHECK. The system announces the day and time you set.
6.To hear the current day and time, press SKIP/TIME SET/ CHECK while the system is on or off.
Note: If you have not set the day and time and you press SKIP/ TIME SET/CHECK, the system announces “Please set time”.
SETTING THE NUMBER OF RINGS
To control how long the system waits before it answers a call,
slideon the system’s right side to the desired number of rings (2, 4, 7 or TS).
TS (Toll Saver) – If you choose the Toll Saver option, and there are new messages, the system answers after two rings. Other- wise, the system answers after four rings. This lets you avoid unnecessary charges when calling by long distance to check your messages. If you hear more than two rings, you know you can hang up because the system has no new messages.
10 | Preparation |
