Radio Shack 43-3808 owner manual Screening Calls

your message clearly into the microphone from about 10 inches away from the system. Release REPEAT/ANNC/DAY when you finish your message. The system sounds a tone and plays back the message. A2 and the message indicator appear alternately.

Notes:

•The maximum length for an announce-only OGM is about 30 seconds. When it reaches the maximum outgoing mes- sage length, the system sounds a tone and plays back the message.

•If you record your own message and subsequently decide to use the prerecorded message, press REPEAT/ANNC/DAY to play the message you recorded. While it is playing, press DELETE to erase your message.

•To hear the outgoing message at any time, press REPEAT/ ANNC/DAY. To stop the outgoing message before it ends, press ON/OFF/STOP.

When the system is set for announce-only, you cannot set it to record incoming messages using the remote commands.

To turn off the announce-only feature so callers can leave mes- sages, slide INCOMING MSG to either 1 or 5 MIN.

Screening Calls

To screen your calls, let the system answer. Listen to the call- er’s message through the system’s speaker. If you decide to an- swer the call, pick up any phone connected to the same phone line as the system. The system stops recording and resets to answer the next call.

14 Operation