Radio Shack 43-3808 owner manual Remote Commands, Lightning

tone, enter your remote operation security code. Enter a remote command (see “Remote Commands” on Page 19). When you finish, press 5# to end remote access.

REMOTE COMMANDS

Press	To
1#	Play new messages.
2#	Play all messages.
3#	Delete the current message.
4#	Repeat a previous message.
5#	Stop and exit.
6#	Skip a message.
7#	Turn on/off the system.
8#	Record an outgoing message.
9#	Record a memo.
0#	Monitor the room.

Note: When listening to messages in remote mode, there is a pause during playback every 2 minutes and 40 seconds. Press 0–9, #, or ∗ to continue playing the message.

LIGHTNING

Your system has built-in protection circuits to reduce the risk of damage from surges in phone line or power line current. These protection circuits meet or exceed FCC requirements. However, lightning striking the phone line can damage your system.

Remote Operation 19