Radio Shack 43-3808 owner manual Operation, Setting the System to Answer Calls

length, the system sounds a tone and plays back the mes- sage.

•If you record your own message and subsequently decide to use the prerecorded message, press REPEAT/ANNC/DAY to play the message you recorded. While it is playing, press DELETE to erase your message.

•To hear the outgoing message at any time, press REPEAT/ ANNC/DAY. To stop the outgoing message before it ends, press ON/OFF/STOP.

ˆOperation

SETTING THE SYSTEM TO ANSWER CALLS

To set the system to answer calls, press ON/OFF/STOP to turn on the system. The display lights.

When the system answers a call, it plays the outgoing mes- sage, then sounds a tone and begins recording.

The caller can leave a 1- to 5-minute long message, depending on which option you have chosen for incoming messages (see “Setting the Incoming Message Length” on Page 11). After the caller hangs up or is silent for more than 7 seconds, or the max- imum message length is reached, the system hangs up and re- sets to answer the next call. The number flashes to indicate a new incoming message has been recorded.

When the system is answering a call or recording a message, if any phone on the same line is picked up or the system detects

12 Operation