ˆPreparation
POWERING THE SYSTEM’S TRANSMITTER
Use the supplied 9V,
Cautions:
You must use a Class 2 power source that sup-
!plies 9V DC and delivers at least 200 mA. Its cen- ter tip must be set to positive and its plug must fit
the transmitter's DC 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the transmitter or the adapter.
•Always connect the AC adapter to the transmitter before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the transmitter.
Plug the adapter’s barrel plug into the transmitter’s DC 9V jack.
Plug the adapter’s other end into a standard AC outlet. The POWER indi- cator lights.
8 |
| Preparation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC 9V
