ˆInstallation
MOUNTING THE PHONE
You can place the telephone’s base on a desk or table, mount it on a standard wall plate, or directly on a wall.
Choose a location that is:
•near an AC outlet
•near a modular telephone line jack
•out of the way of normal activities
•away from electrical machinery, electri- cal appliances, metal walls or filing cabi- nets, wireless intercoms, alarms, and room monitors
•away from other cordless phones
The base’s location affects the phone’s range. If you have a choice of several loca- tions, try each to see which provides the best performance.
Cautions:
You must use a Class 2 power
!source that supplies 9V DC
and delivers at least 350 mA. Its center tip must be set to positive and its plug must fit the telephone's
jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the telephone or the adapter.
•Always connect the AC adapter to the telephone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you dis- connect it from the telephone.
Notes:
•Your telephone connects directly to a modular telephone line jack. If your phone line jack is not a modular jack, you can update the wiring yourself, using jacks and adapters available at your local RadioShack store. Or, you can let the phone company update the wiring for you.
•The USOC number of the jack to be installed is RJ11C (RJ11W for a wall plate).
On a Desk Top
1.Plug one end of the supplied long modu- lar cord into the TEL LINE jack on the back of the base.
2.Plug the modular cord’s other end into a modular telephone line jack.
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
8 |
| Installation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
