Placing the Base on a Desk Top
Follow these steps when you place the base on a desk, shelf, or table.
1.Plug one end of the supplied long modular cord into the LINE jack on the back of the base.
4.Plug the adapter into a standard AC outlet.
5.Plug the modular cord’s other end into a modular phone line jack.
| DC12V | LINE |
T P |
|
|
2. Insert the supplied power adapter’s barrel plug into the DC
12V jack on the back of the base.
6. Fully extend the base’s antenna and place it in a vertical position.
| DC12V | LINE |
T P |
|
3.Route the adapter’s cord through the strain relief slot on top of the base.
Strain Relief Slot
Mounting the Base on a Wall Plate
1.Plug one end of the supplied short modular cord into the LINE jack on the back of the base.
| DC12V | LINE |
T P |
| |
|
|
6
