Radio Shack ET-551 owner manual Paging, Memory Dialing, Storing a Number in Memory

43-1051.fm Page 14 Tuesday, August 17, 1999 1:08 PM

PAGING

To page the person who has the hand- set or to locate the handset when the phone is not in use, press PAGE on the base. The handset beeps three times. If you hold down PAGE for 2 seconds, the handset beeps for 30 seconds to give you time to locate the handset.

PAGE

RadioShack

25 CHANNEL

CHARGE 1

2

	3
	4
OFF	5
	6
	7
RINGER	8
	9
ON

14

MEMORY DIALING

You can store up to 16 digits in each of the ten memory locations, then dial a stored number by pressing a one-digit memory location number.

Storing a Number in Memory

Note: An error tone sounds and the phone exits the programming mode if you wait more than about 6 seconds between each key press or enter more than 16 digits.

1.Press MEMORY. The TALK indica- tor flashes.

FLASH

TALK

REDIAL MEMORY CHANNEL

ABCDEF

1 2 3

2.Enter the phone number and any tone and pause entries (see “Using Tone Services on a Pulse Line” on Page 13 and “Entering a Pause” on Page 15).

Note: Each tone or pause entry uses one digit of memory.

3.Press MEMORY, then enter the memory location number (0–9). A single tone sounds to indicate that the number is stored.

Repeat Steps 2–4 for each num- ber you want to store.