Specifications
Product type | Projector |
Model |
|
Video system | |
| |
Display method | Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments |
DMD panel | Panel size: 0.65", 1chip DMD |
| Drive method: Digital Light Processing (DLP™) |
| No. of dots: 983,040 dots (1280 [H] × 768 [V]) |
Lens | |
Projection lamp | 275 W DC lamp |
Component input signal | RCA connector |
(INPUT1/2) | Y: 1.0 |
| PB (CB): 0.7 |
| PR (CR): 0.7 |
(INPUT 3) | Y (luminance signal): 1.0 |
| C (chrominance signal): Burst 0.286 |
Video input signal | RCA connector: VIDEO, composite video, 1.0 |
(INPUT 4) | terminated |
Computer RGB/ |
|
Component input signal | RGB separate/sync on green type analog input: |
(INPUT 5) | HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) |
| VERTICAL SYNC. SIGNAL: Same as above |
HDMI input signal | HDMI terminal (video signal only) |
(INPUT 6) |
|
Horizontal resolution | 720 TV lines (DTV720P) |
Vertical frequency | |
Horizontal frequency | |
Pixel clock | |
TRIGGER terminal | Power jack: DC 12V output |
Rated voltage | AC |
Input current | 3.7 A |
Rated frequency | 50/60 Hz |
Power consumption | 355 W (Lamp Setting “Bright”)/ |
310 W (Lamp Setting “Eco + Quiet”) with AC 100 V 340 W (Lamp Setting “Bright”)/
300 W (Lamp Setting “Eco + Quiet”) with AC 240 V
Power consumption (standby) 4 W (AC 100 V) – 5 W (AC 240 V)*1
Heat dissipation | 1,335 | BTU/hour (Lamp Setting “Bright”)/ |
| 1,165 | BTU/hour (Lamp Setting “Eco + Quiet”) with AC 100 V |
| 1,280 | BTU/hour (Lamp Setting “Bright”)/ |
| 1,130 | BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V |
Operating temperature | 41°F to 95°F (+5°C to +35°C) | |
Storage temperature | ||
Cabinet | Plastic | |
I/R carrier frequency | 38 kHz | |
Dimensions (approx.) | 12 13/32" × 4 19/64" × 11 1/32" (315 (W) × 109 (H) × 280 (D) mm) (main body only) | |
| 12 13/32" × 4 47/64" × 11 37/64" (315 (W) × 120 (H) × 294 (D) mm) (including adjust- | |
| ment foot and projecting parts) | |
Weight (approx.) | 8.8 lbs. (4.0 kg) | |
Replacement parts | Remote control, Power cord for Europe, except U.K., Power cord for U.K. and | |
| Singapore, Power cord for Australia, New Zealand and Oceania, 21 pin RCA | |
| conversion adaptor, Video cable, Operation manual |
*1 When STANDBY Mode is set to “Eco”
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specifica- tion figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
62