Manuals / Sharp / Computer Equipment / Projector

Sharp XV-Z3000U operation manual 4Fan Mode Setting, 5Returning to the Default Settings

Models: XV-Z3000U

1 68

Download 68 pages 28.78 Kb

Page 51

2Selecting the Transmission Speed (RS-232C)

Using the “Options” Menu (Continued)

2Selecting the Transmission Speed (RS-232C)

Make sure that both the projector and computer are set for the same baud rate.

	Selectable	Description
	items	Description
	items

9600bps Transmission speed is slow.

P

R

115200bps Transmission speed is rapid.

Menu operation n Page 41

4Fan Mode Setting

This function changes the fan rotation speed.

	Selectable	Description
	items	Description
	items

	Normal	Suitable for normal environments.

	High	Select this when using the projector at
		altitudes of approximately 4,900 feet
		(1,500 meters) or more.

When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

3Reducing the Power

Consumption When the

Power Is in Standby Mode

When “STANDBY Mode” has been set to “Stan- dard”, the RS-232C function is activated and power is consumed even in standby mode. It is recommended that “STANDBY Mode” be set to “Eco” when it is not being used. This reduces power consumption when the projector is in standby mode.

Selectable items	Description

Standard	The RS-232C function is
	activated even if the projector is
	in standby mode.

Eco	The RS-232C function is
	switched off when the projector
	is in standby mode.

Note

•When you want to control the projector using the RS-232C function, set to “Standard”.

5Returning to the Default Settings

Use “All Reset” to initialize all the adjustments you have made to the default settings.

Note

The following items cannot be initialized.

•“Fine Sync” menu

–Special Modes

•“Options1” menu

–Lamp Timer (Life)

–Language

6Selecting the On-screen Display Language

The projector can switch the on-screen display language among 11 languages.

English Svenska

Deutsch Português

Español

Nederlands

Français

Italiano

50

Image 51

Sharp XV-Z3000U operation manual 4Fan Mode Setting, 3Reducing the Power Consumption When the Power Is in Standby Mode

Contents

MODE D’EMPLOI PROJECTOROPERATION MANUAL PROJECTEURIntroduction 1. WARRANTY2. CONSUMER PRODUCT SAFETY ACT ENGLISHPRODUCT DISPOSAL Caution Concerning Lamp ReplacementINFORMATION Declaration of conformityIntroduction How to Read this Operation ManualFor Future Reference PP. 60 andUseful Features ContentsUsing SetupReference AppendixIntroduction 8. Accessories IMPORTANT SAFEGUARDS5. Cleaning 11. Power SourcesIntroduction 18. Damage Requiring Service19. Replacement Parts 20. Safety CheckWarning about placing the projector in a high position Observe the following safeguards when setting up your projectorCaution concerning the setup of the pro- jector Caution concerning the lamp unitIntroduction InfoUsing the projector in other countries Temperature monitor functionAccessories Supplied accessoriesOptional accessories Top View Part Names and FunctionsProjector IntroductionPart Names and Functions Continued Rear ViewTerminals Using the Kensington Lock on the projector IntroductionFor selecting menu items 3 Attach the cover and slide it until it clicks into place Inserting the BatteriesPart Names and Functions Continued 2 Insert the batteriesIntroduction Usable Range3. Remove the lens cap and turn the projector on P Setup and ProjectionQuick Start 1. Place the projector facing a wall or a screen5. Select the INPUT mode 6. Adjust the focus, image size, and projector angle PP. 308. Turn the Power off 4. Turn the video equipment on and start playbackCeiling-mount Setup Setting up the ProjectorSetting up the Projector Standard Setup Front ProjectionSetup Projection PRJ ModeIndication of the Projection Image Size and Projection Distance When using a normal screen 43 and projecting 43 image SIDE BAR Mode Setting up the Projector ContinuedPicture Screen Size and Projection Distance When using a wide screen 169 and projecting 169 imageWhen using a normal screen 43 and projecting 169 image SetupSamples of Cables for Connection Connections Connecting to Video EquipmentConnecting to Video Equipment Continued When connecting to equipment with S-video output terminal INPUT3When connecting to equipment with video output terminal INPUT4 When connecting to equipment with HDMI output teminal INPUT6 3 RCA to 15-pin D-sub cable optional accessory AN-C3CP2Connections accessory Connecting to a ComputerControlling the Projector by a Computer InfoConnections Info Connecting the Power CordTurning the Projector On/Off Turning the Projector onTurning the Power off Putting the Projector into Standby Mode Switching the Input ModeImage Projection OperationBasic3 Adjusting the Height Adjusting the Projected Image1 Adjusting the Focus 2 Adjusting the Screen SizeOperationBasic 3 Use the rear adjustment foot to make the projector levelRear adjustment foot InfoCorrecting Trapezoidal Distortion Image Projection ContinuedThere are the two types of the Keystone Correction Each time cKEYSTONE is pressed, the display toggles as follows Selecting the Type of Correction“GEOMETRIC ADJUSTMENT” will be displayed OperationBasic4 Press i ENTER to set the posi- tion GEOMETRIC ADJUSTMENTImage Projection Continued InfoPress cKEYSTONE or iENTER H & V KEYSTONEon the remote control and the OperationBasicVIDEO Resize ModePress m RESIZE on the projector or jRESIZE on the remote control Image Projection ContinuedOperationBasic About CopyrightsComputer Freezing a Moving Image Operating with the Remote ControlSwitching the Iris Setting Shifting the Projected Im- age Vertically Image Shift“C.M.S.” Menu ItemsThe following shows the items that can be set in the projector “Picture” menu“Options2” menu Menu Items Continued“Fine Sync” menu “Options1” menu1 Press dMENU Using the Menu ScreenMenu Selections Adjustments 2 Press Q or O to select the menu icon to adjustPress O or Q to adjust the item selected Using the Menu Screen ContinuedTo adjust the projected image while watching it 3 Press P or R to select the item to adjustPicture Adjustment “Picture” menu 2Adjusting the Image1Selecting the Picture Mode 5 Progressive Picture Adjustment “Picture” menu Continued3Adjusting the Color Temperature 4Adjusting the Colors6Reducing Image Noise 7Switching the IrisSetting 8Lamp Setting3Auto Sync Auto Sync Adjustment Computer Image Adjustment “Fine Sync” menu1Adjusting the Computer Image 2Special Modes Setting3 Adjusting the Vertical Size of the Display Subtitle Setting Using the “Options” Menu2Adjusting the Overscan 1Adjusting the Image Position6Signal Type Setting Using the “Options” Menu Continued4Setting On-screen Display 5Setting the Video System1 Reversing/Inverting Projected Images 9Auto Power OffFunction 0Checking the Lamp Life Status6Selecting the On-screen Display Language 4Fan Mode Setting3Reducing the Power Consumption When the Power Is in Standby Mode 5Returning to the Default SettingsMaintenance AppendixInfo Top View Maintenance IndicatorsAbout the temperature warning indicator About the lamp indicatorIf the temperature warning indicator illuminates, and the projector enters standby mode, follow the possible solutions above and then wait until the projector has cooled down completely before plug- ging in the power cord and turning the power back on. At least 10 minutes InfoAppendix Caution Concerning the Lamp Regarding the LampLamp Hg LAMP CONTAINS MERCURY For State Lamp Disposal InformationAppendix Removing and Installing the Lamp Unit2 Disconnect the power cord Info2 Reset the lamp timer Resetting the Lamp TimerRegarding the Lamp Continued 1 Connect the power cordComputer Connecting Pin AssignmentsAppendix ProjectorC4 P1 P2 RS-232C Specifications and Command SettingsConnecting Pin Assignments Continued C1 C2Computer Computer Compatibility ChartColor is faded or poor Troubleshooting23-27 23-27The black levels of the Service Information For the U.SAppendix 23-27Specifications Units inches mm Dimensions11, 12 IndexStandard connector Temperature warning indicatorAppendix