Radio Shack ET-926 owner manual Using Flash, Paging

43-1096.fm Page 14 Tuesday, August 17, 1999 3:47 PM

USING FLASH

Flash performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

For example, if you have Call Waiting, press Flash to answer an incoming call without disconnecting the current call. Press Flash again to return to the first call.

Note: If you do not have any special phone services, pressing Flash might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these special tone services by follow- ing these steps.

1.Be sure PULSE-TONEis set to

PULSE.

2.Dial the service’s main number.

14

3.When the service answers, press Tone/ . Any additional numbers you dial are sent as tone signals.

4.After you complete the call, return the handset to the base or press Talk. The phone automatically resets to the pulse mode.

PAGING

To page the person who has the hand- set or to locate the handset when the phone is not in use, press Page on the base. The handset beeps for 14 sec- onds. To stop it from beeping sooner, press Talk on the handset twice or Page on the base.